Normal Boot Loader For Pandora’s Battery Released

Posted by x3sphere at September 11, 2007, 1:49 pm


BOOSTER of DevHook fame has released a normal boot loader utility for anyone who has converted a PSP battery to Pandora.

Essentially, what this tool can do, is write a special IPL to any Memory Stick PRO DUO (no, 32MB sticks won’t work) so that when inserted in conjunction with a Pandora’s Battery, the PSP will boot to the XMB as normal. Quite useful if you have any spare memory sticks laying around.

How to install

1.Double click “install.cmd” in Windows XP/2K(Administrator).
2.Connect MsProDuo to PC via USB.
It is possible to use PSP USB Connection,or any USB MsProDuo Reader.
3.press ‘Y’ key to “Are You Sure ?[Y]” message.
4.Disconnect MsProDuo after few seconds.

Or,
Write the ipl_ms.bin to absolute sectors 0×10-0×17 of MsProDuo.

Download Normal Boot Loader For Pandora’s Battery

Read moreMulti Boot Loader For Pandora’s Battery Released, New PSP Batteries Pandora Proof?, Pandora Installer For 3.X Kernels Revision 2, Pandora Installer For 3.X Kernels, Extended Pandora Boot Menu v0.86t2

Comments

XsavioR says:

Thanks allot BOOSTER. I have been anticipating this since I saw Pandora's.

Acerthief says:

yeah!~ now i can take two batteries on my grad trip. Thanks BOOSTER!

jedsteroo says:

i can't seem to get it done. currently using ms card reader and ms, showing it is on my "I" drive.

1)i go to start>run>"cmd"
2)typed in "cd .."
3)typed in "cd psp_normal_boot_loader"
4)typed in "msinst I ipl_ms.bin"

ERROR: Cannot Open I. why is this so?

x3sphere says:

Strange... by any chance do you have a file open on the memory stick or is an explorer window open on it? If that's the case then the memory stick is technically "in-use" and the program can't write to it, so close out of any windows using the MS.

jedsteroo says:

How to install

1.Double click "install.cmd" in Windows XP/2K(Administrator).
2.Connect MsProDuo to PC via USB.
It is possible to use PSP USB Connection,or any USB MsProDuo Reader.
3.press 'Y' key to "Are You Sure ?[Y]" message.
4.Disconnect MsProDuo after few seconds.

Or,
Write the ipl_ms.bin to absolute sectors 0x10-0x17 of MsProDuo.

With reference to the instructions in the first part, I do not get the press 'Y' key. the windows command prompt window only gets stuck at

"Connect target MsProDuo"

Acerthief says:

i perfer putting your MS into your PSP and connect it to your computer with USB.
don't connect before you start install.cmd!
it works perfectly,

the only problem is, after you boot it, and you just power button up to let the PSP go into standby mode, it closes completely. so if your using it to play a long game, don't close it, or else when you boot it back up again it starts all the way the from the logo screen.

x3sphere says:

I told him to try running mspformat on the stick, that might fix it. If not then BOOSTER's tool must be set up to read from USB only and it won't work on card readers.

Julius Caius says:

Hey guys,

I'd just have a few questions.

1: Is the memory card useless for all other intents and purposes after this? Or can it be used to store games photos etc. just like before?

2: Can this modification be reversed (the memory card, not the battery)?

3: I've heard something like that you cannot recharge your battery anymore after it has been converted to a pandora's... is this true?

XsavioR says:

1. yes it can be used

2. format it with the psp jualla like new

3. even if true, unconvert it charge it and yer set.

you say:

Login with your username and password below. New User?





ss_blog_claim=bf55edcce6ff2f078693a24c8876e229